SP2600A
The SP2600A panels add one additional and unique feature two way audio into the suite. Security Guards or Entry Phones may call directly into the suite without the need for a phone line. This ensures that communication is always available for emergency situations. This feature also ensures that a call received from the lobby Entry Phone will result in a door release form a resident in the building – an important security consideration!
Enhancements:
Privacy Mode:
Permits the Resident to deny access into their suite from the elevator.
Party Mode:
Allows visitors to enter “en mass” into the suite without requiring the resident or guard to grant individual access.
Check-in:
Will signal a resident/patient to check-in within a given time period. If the resident does not “check-in” an alarm will sound at the guard station or remote monitoring centre.
Suite Occupancy:
Provides an automated method of check-in by determining if there is motion within the suite over a duration of time. If no movement is detected an alarm will sound at the guard station or remote monitoring centre*
Building Access:
Users may also receive calls on the suite panel, in addition to or in the absence of a telephone then grant access into the building and control elevators via a Condoplex Entry Phone unit.
Remote Intercom:
The SP2600’s will support up to 4 slave panels and with an optional expander connect two remote intercoms for emergency service with voice audio, remote chimes and other functions.
Audio Settings:
Adjustable intercom and beep volume control. Separate front/back doorbells with unique tones and control label chimes
Environmental Security
Heat and Humidity sensors may be Monitored with alarm set points (requires optional external receiver).
Dimensions
Shipping Weight
Operating Temp.
Power Requirement
Mounting Requirement
Communication Format
Speaker
Zone Type
Loop Response
Loop Resistance
Display
4.7 in (W) x 6.5 in (H) x 0.6 in (D)
200 g (7.1 oz)
0ºc to 50ºc / 32ºF to 132ºF
12 VDC @ 35mA, reverse protected, 2 wire min. 18 AWG
2 – 3 gang electrical box
RS485, 2-wire twisted direct connection
Audio, Multi Tone, 700-1000mW speaker, 75dB when siren on
Open Collector, Entry/Exit, Interior, Perimeter, Panic, Fire, Emergency
Programmable Zones, 100 msec to 1.5 sec
Programmable 4 State loop, NC loop and No loop
8 status LED’s
Features
- Slim line panel
- Silicone keypad
- 8 Status LEDs
- Messaging LED
- Common Area Emergency Notification
- 4 Programmable Zones
- Door Bell / Chime
- Supports 4 Slave Panels
- Built-in Self-Diagnostics
1 Touch Features
- Audio: Open or receive an immediate hands-free call to building staff
- Panic: Summons building security staff
- Emergency: Summons medical attention and opens audio communications
- Instant: Arms interior zones only and removes delay from doors
- Shunt: Permits temporary bypass of zone until repair
Optional
- RE1/RE2 /RG2G Expander
- 4 Zone Expander