The SP2800 panel is designed to give your suites a chic, ultra-modern look. The technology deployed in this suite panel parallels that found in today’s smart phones, namely, Cap-Touch technology, light-pipe backlighting and dead fronted face. The keypad is mounted on floating glass and has crisp bright characters that only appear when the resident is in proximity to the keypad or when the panel requires the attention of the resident. Otherwise the dead fronting makes the panel less obtrusive when not in use. Smart Power logic allows the suite panel to operate at less then 25ma even with the LCD on.

A 2 line by 16 character LCD provides clear instruction, text messaging and easy to use menus. Four Status indicators provide Arming, Alarm, Message and Zone By-pass information.

Dedicated keys for calling Security and EMERGENCY are included to summon immediate assistance. The open face design ensures easy access to buttons and removes the clutter of door covers.


New features may be added at any time as firmware changes can be installed over the internet.

Web Portal:
Residents may purchase optional services to arm/disarm, view activity, enter/remove user codes and receive email notifications.

Privacy Mode:
Permits the Resident to deny access into their suite from the elevator.

Party Mode:
Allows visitors to enter “en mass” into the suite without requiring the resident or guard to grant individual access.

Will signal a resident/patient to check-in within a given time period. If the resident does not “check-in” an alarm will sound at the guard station or remote monitoring centre.

Suite Occupancy:
Provides an automated method of check-in by determining if there is motion within the suite over a duration of time. If no movement is detected an alarm will sound at the guard station or remote monitoring centre*

Remote Rf Functionality
With the optional Rf receiver installed you may arm/disarm your suite, summon emergency assistance and will monitor Water/NG leaks and control automated valves.*

Environmental Security
Heat and Humidity sensors may be Monitored with alarm set points (requires optional external receiver).


Shipping Weight
Operating Temp.
Power Requirement

Mounting Requirement
Communication Format

Zone Type

Loop Response
Loop Resistance

Wireless Zones

8.8 cm (W) x 14 cm (H) x 1.5 cm (D)
3.5 in(W) x 5.5 in (H) x 0.6 in (D)
325 g (11.4 oz)
0ºc to 40ºc / 32ºF to 104ºF
12 VDC @ 22mA(Idle), reverse protected, 2 wire min. 18 AWG
Single gang electrical box
RS485, 2-wire twisted direct connection
Piezo Sounder, 80 dB when siren ON

Entry/Exit, 24hr, Interior, Perimeter, Panic, Fire, Emergency, Follower
4 Programmable zones – 100 msec to 3.0 sec
EOL Resistor 1K: or 4.7K Programmable
(1k =Ohms(Normal), NO,NC NO/NC Supervised
2 Line x 16 Characters
433Mhz, Superhet Receiver / Transmitter
Pendant, Sensors